We are not the manufacturer, authorised distributor or authorised representative of the IFM brand in South Africa. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
SI5100
Description
Flow monitor with reliable monitoring of liquids and gases in pipes
Stock availability:
On request
Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
Media | Liquids, Gases, Aggressive media | ||||||||
Measured medium temperature [°C] | -25…80 | ||||||||
Pressure strength [bar] | 100 | ||||||||
Liquids | |||||||||
Measured medium temperature [°C] | -25…80 | ||||||||
Gases | |||||||||
Measured medium temperature [°C] | -25…80 | ||||||||
Electronic data | |||||||||
Operating voltage [V] | 19…36 DC | ||||||||
Current consumption [mA] | < 60 | ||||||||
Protection class | III | ||||||||
Reverse polarity protection | yes | ||||||||
Power-on delay time [s] | 10 | ||||||||
Inputs/outputs | |||||||||
Number of inputs and outputs | Number of digital outputs: 1 | ||||||||
Outputs | |||||||||
Total number of outputs | 1 | ||||||||
Output signal | Switching signal | ||||||||
Electrical version | PNP | ||||||||
Number of digital outputs | 1 | ||||||||
Output function | normally open / normally closed, (parameterizable) | ||||||||
Max. voltage drop of switching output DC [V] | 2.5 | ||||||||
DC load current of switching output DC [mA] | 250 | ||||||||
Short-circuit protection | yes | ||||||||
Short-circuit protection type | clocked | ||||||||
Overcurrent protection | yes | ||||||||
Measurement/setting range | |||||||||
Probe length L [mm] | 45 | ||||||||
Liquids | |||||||||
Parameter setting within [cm/s] | 3…300 | ||||||||
Max. sensitivity [cm/s] | 3…100 | ||||||||
Gases | |||||||||
Parameter setting within [cm/s] | 200…3000 | ||||||||
Max. sensitivity [cm/s] | 200…800 | ||||||||
Accuracy/accuracy | |||||||||
Reproducibility [cm /s] | 1…5 | ||||||||
Note about repeatability |
| ||||||||
Temperature drift [cm/s x 1/K] | 0.1, (for water 5…100 cm/s, 10…70 °C) | ||||||||
Max. temperature gradient (rate of change of medium temperature) [K/min] | 300 | ||||||||
Switch point error [cm/ s] | ± 2…± 10, (for water 5…100 cm/s, 25 °C, factory setting) | ||||||||
Hysteresis [cm/ s] | 2…5, (for water 5…100 cm/s, 25 °C, factory setting) | ||||||||
Response time | |||||||||
Liquids | |||||||||
Response time [s] | 1…2, (for temperature gradient: 1 K/min) | ||||||||
Gases | |||||||||
Response time [s] | 1 …10 | ||||||||
Software / Programs programming | |||||||||
Setting the switch point | Programming buttons | ||||||||
Operating conditions | |||||||||
Ambient temperature [°C] | -25…80 | ||||||||
Storage temperature [°C] | -25…100 | ||||||||
Degree of protection | IP 67 | ||||||||
Tests / approvals | th> | ||||||||
EMC |
| ||||||||
Impact resistance |
| ||||||||
Vibration resistance |
| ||||||||
MTTF [years] | 298 | ||||||||
Mechanical data | |||||||||
Weight [g] | 238 | ||||||||
Dimensions [mm] | M18 x 1.5 | ||||||||
Thread designation | M18 x 1.5 | ||||||||
Material | stainless steel steel (1.4404 / 316L), stainless steel steel (1.4310 / 301), PC, PBT-GF20, EPDM/X medium | titanium (3.7035), O-ring: FKM 80 Shore A | |||||||
Process connection | M18 x 1.5 internal thread | ||||||||
Displays / Controls | |||||||||
Display |
| ||||||||
Remarks | |||||||||
Recommendations | Pay attention to the change in compressive strength | ||||||||
Packing value | 1 piece | ||||||||
electrical connection | |||||||||
Connection | Connector: 1 x M12 |