We are not the manufacturer, authorised distributor or authorised representative of the IFM brand in South Africa. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
PN3093
Description
Pressure sensor with display and robust design for use in harsh industrial environments
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Application | |||||||
|---|---|---|---|---|---|---|---|
| Measuring element | Ceramic capacitive pressure cell | ||||||
| Application | For general industrial applications | ||||||
| Media | Liquid or gaseous media | ||||||
| Measured medium temperature [°C] | -25…80 | ||||||
| Pressure strength |
| ||||||
| Min. burst pressure |
| ||||||
| Vacuum resistance [mbar] | -1000 | ||||||
| Pressure type | Relative pressure | ||||||
| Electronic data | |||||||
| Operating voltage [V] | 18…30 DC, (according to EN 50178 SELV/PELV) | ||||||
| Current consumption [mA] | < 35 | ||||||
| Min. insulation resistance [M?] | 100, (500 V DC) | ||||||
| Protection class | III | ||||||
| Reverse polarity protection | yes | ||||||
| Power-on delay time [s] | 0.3 | ||||||
| Built-in watchdog | yes | ||||||
| Inputs/outputs | |||||||
| Number of inputs and outputs | Number of digital outputs: 1, Number of analog outputs: 1 | ||||||
| Outputs | |||||||
| Total number of outputs | 2 | ||||||
| Output signal | Switching signal, analogue signal, IO- Link, (configurable) | ||||||
| Electrical version | PNP | ||||||
| Number of digital outputs | 1 | ||||||
| Output function | normally open / normally closed, (parameterizable) | ||||||
| Max. voltage drop DC switching output [V] | 2.5 | ||||||
| DC switching output load current DC [mA] | 150, (200 (…60 °C) 250 (…40 °C)) | ||||||
| DC switching frequency [Hz] | < 170 | ||||||
| Number of analog outputs | 1 | ||||||
| Analog current output [mA] | 4… 20 | ||||||
| Maximum load [?] | 500 | ||||||
| Analog voltage output [V] | 0…10 | ||||||
| Min. load resistance [?] | 2000 | ||||||
| Short circuit protection | yes | ||||||
| Type of short-circuit protection | clocked | ||||||
| Overcurrent protection | yes | ||||||
| Measuring/setting range | |||||||
| Measuring range |
| ||||||
| Setting point SP |
| ||||||
| Reset point rP |
| ||||||
| In steps of |
| ||||||
| Accuracy/accuracy Repeatability [% of range] | < ± 0.1, (at and temperature change < 10 K) | ||||||
| Deviation from curve [% of span] | < ± 0.25 (BFSL) / < ± 0.5 (LS ), (BFSL = Best Fit Straight Line, LS = Set Limit) | ||||||
| Hysteresis deviation [% of range] | < ± 0.25 | ||||||
| Long-term stability [% of range] | < ± 0.05, (for 6 months) | ||||||
| Zero point temperature coefficient [% of measuring range / 10 K] | 0.2, (-25…80 °C) | ||||||
| Span temperature coefficient [ % of measuring range / 10 K] | 0.2, (-25…80 °C) | ||||||
| Response time | |||||||
| Response time [ms] | < 3 | ||||||
| Programmable delay time dS, dr [s] | 0…50 | ||||||
| Switching output damping dAP [s] | 0…4 | ||||||
| Analog output damping dAA [s] | 0…4 | ||||||
| Max. analog output response time [ms] | 3 | ||||||
| Software / Programming | |||||||
| Parameter selection | Hysteresis / Window, Normally Open / Normally Closed, On / Off Delay, Damping, Display, Current / Voltage Output | ||||||
| Interfaces | >|||||||
| Communication interface | IO-Link | ||||||
| Transmission method | COM2 | ||||||
| IO-Link test | 1.1 | ||||||
| SDCI standard | IEC 61131-9 | ||||||
| IO-Link Device ID | 430 d / 00 01 ae h | ||||||
| Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis | ||||||
| SIO mode | yes | ||||||
| Desired port type | A | ||||||
| Analog operating data | 1 | ||||||
| Binary operating data | 1 | ||||||
| Minimum operating cycle time [ms] | 2.3 | 2.3 | |||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -25…80 | ||||||
| Storage temperature [°C] | -40…100 | ||||||
| Degree of protection | IP 65, IP 67 | ||||||
| EMC |
| ||||||
| Impact resistance |
| ||||||
| Vibration resistance |
| ||||||
| MTTF [years] | 187 | ||||||
| UL certified |
| ||||||
| Pressure Equipment Directive | Good engineering practice, can be used for fluid group 2, fluid group 1 on request | ||||||
| Mechanical data< /th> | |||||||
| Weight [g] | 235 | ||||||
| Material | stainless steel steel (1.4404 / 316L) stainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC medium | stainless steel steel (1.4404 / 316L), Al2O3 (ceramic), FKM | |||||
| Min. pressure cycles | 100 million | ||||||
| Tightening torque [Nm] | 25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating) | ||||||
| Process connection | Threaded connection G 1/4 female thread M6 I | ||||||
| Built-in limiter | none (can be modified) | ||||||
| Displays / Controls | |||||||
| Display |
| ||||||
| Notes | |||||||
| Packing quantity | 1 piece | ||||||
| electrical connection | |||||||
| Connection | Connector: 1 x M12, Contacts: gold-plated |
